FLAT ROOF SYSTEMS

CLASSICBOND PRO EPDM ROOF SYSTEM

Ideal for virtually any residential, commercial or industrial flat roofing project and contractor, ClassicBond PRO EPDM single ply membrane features a polyester fleece laminated to the underside giving a stronger and thicker flat roofing membrane.

This flexible synthetic rubber membrane with exceptional weather resistance, provides the contractor and building owner with an unmatched, superior flat roof system.

All ClassicBond PRO EPDM membranes have Pre-applied Seam Tape (PST) – a seaming system that is installed with no heat welders, flames or specialist tools. The simplicity and speed of this seam makes it a contractor favourite.

Key Features

Easy to handleMembrane size is 1.52m x 12.2m (18.54m²)

QuickPre-applied Seam Tape for fast, reliable seams

DurableFleece reinforced for added toughness 

Weather ResistantNot affected by extremes of temperature

Weight75% less than a bitumen felt systems

No ShrinkageA quality that standard EPDM can’t offer

Tough Will not tear, split or crack

FlexibleOver 300% flexibility to easily accommodate building movement

 

Outstanding Performance

ClassicBond PRO EPDM membranes offer 180% greater tear resistance and 40% greater puncture resistance than comparable non-fleece reinforced roofing membranes.

Specifically designed for use over minor imperfections, splits or ridges that may have formed in the existing roof system, the tough fleece reinforcement on ClassicBond PRO provides excellent protection over a range of substrates.

The flexibility of the membrane allows for seamless angle changes and the enhanced adhesion characteristics of the polyester fleece makes installation to upstands of any height, to most clean & dry surfaces a possibility.

The range of ClassicBond PRO Adhesives makes the installation a flame and heat free process minimising any fire risk normally associated with flat roofing. The roofing membrane is laid into either acrylic or polyurethane adhesive on the flat or low slope areas and adhered using ClassicBond PRO bonding adhesive to the roof perimeter.

The choice of low odour adhesives makes the installation perfect for occupied homes, schools and businesses.

The outstanding strength and longevity of the membrane is suitable for all types of green roof systems and can also be slabbed or decked using ClassicBond PRO Paving Support Discs.

For areas that need maintenance access, Pressure Sensitive Walkway pads are available to provide a hardy, non-slip surface for maintenance staff on the roof.

The Ultimate GRP Flat Roof System

When it comes to flat roof replacements, the GRP Roof 1010 System offers unrivalled performance at exceptional value and a genuinely long-lasting solution. Specially formulated to provide durable waterproof protection, GRP Roof 1010 has been developed by the leading polyester chemists at Res-Tec specifically for the purpose of flat roofing – unlike many other GRP roofing products. Every batch is made to a rigorous specification for consistent high quality roofing performance.The system is LABC approved for ensured compliance with building regulations, fully fire tested and supported by a 20 year materials guarantee. GRP Roof 1010 is available to buy from a wide range of stockists across the UK and Ireland.

What makes GRP Roof 1010 different?

  • Installations supported by Res-Tec’s trusted 20 year materials guarantee
  • Simple and quick installation with a waterproof finish that is proven to last
  • Fire tested to BS 476-3:2004 with an BROOF(t4) and F.AB result meaning unrestricted use under Building Regulations
  • Attractive finish to complement any home
  • Anti-slip finish available for balconies and walkways
  • Cold applied for maximum safety – no risks from open flames and other hot works
  • Suitable for application in temperatures as low as 5°C or as high as 30°C
  • Totally seamless membrane – no joints, no welds, no weak points
  • Manufactured to ISO 9001 and ISO 14001 standards for consistent quality

There is simply no other roofing system capable of delivering a total waterproofing solution across such a wide range of flat roof repair and flat roof coating applications. Similar to fibreglass systems, Flexitec 2020 uses a powder hardener for rapid curing and is reinforced with fibreglass CSM for extra strength and crack-resistance. The finished membrane is also extremely tough, impact resistant and can easily accommodate foot traffic.However due to its unique flexible technology, Flexitec 2020 is able to coat all common roof surfaces such as felt, concrete, asphalt, GRP and timber – meaning roofs can be overlaid without the need for strip and replace works. No matter the size, shape or complexity of the roof, Flexitec 2020 provides a seamless, tough and flexible membrane to any roof or balcony area. This next generation roofing system is available to buy from a wide range of stockists across the UK and Ireland.

What makes Flexitec 2020 different?

  • Similar to GRP fibreglass, Flexitec 2020 is genuinely rapid-curing (30 – 60mins walk-over time) with an extra-tough finish. Similar to liquid overlay systems it’s flexible and can coat a range of roof surfaces.
  • Can be applied to almost any roof surfaces including felt, asphalt, concrete, GRP, PVC single-ply, metal details and approved insulation boards
  • Single resin system that can be repaired / overcoated without grinding down
  • Fire tested to BS 476-3 Rating: F.AA and EN 13501-5(4) Rating: BROOF(t4) – the highest rating a flat roof system can achieve and allowing for unrestricted use under UK regs.
  • LABC Registered Detail certified (Certificate No.EW1000), ensuring compliance with the latest building regulations.
  • Applied as a one coat (10 year repair system) or two coat (20 year roofing system) system
  • Highly flexible and suitable for any size or shape roof without the need for expansion joints
  • Extremely rapid installation with walk-on times of 30-60 minutes
  • Uses 225g/m2 fibreglass CSM for extra tough membrane that lasts decades
  • Installations by trained installers of the two-coat system are supported by Res-Tec’s trusted 20 year materials guarantee
  • Anti-slip finish available for balconies and walkways
  • Cold applied for maximum safety – no risks from open flames and other hot works
  • Suitable for application in temperatures as low as 1°C (with winter accelerator) or as high as 30°C
  • Totally seamless membrane – no joints, no welds, no weak points
  • Manufactured to ISO 9001 and ISO 14001 standards for consistent quality